Philips Ultrafill System™

In stock

Philips Ultrafill System™ is an advanced home oxygen system that combines a stationary oxygen concentrator, filling station, and high-capacity 3,000 PSI cylinders to meet a wide range of needs for you, the oxygen user, including those who are highly active or require continuous flow oxygen.

The benefits are continuous, it allows oxygen patients the ability to fill tanks and receive oxygen therapy simultaneously, and repeatedly.

Unlike other oxygen generating systems, there is no need to switch to another device during the filling process.

Please Note:  A prescription is required for the Philips Ultrafill System™.


Unique Design:

Philips Ultrafill System™'s unique design and high capacity 3,000 PSI cylinders provide a number of ways to reduce your costs while offering you the superior oxygen duration and convenience of the UltraFill home oxygen system.

Fewer Cylinders:

Since 3,000 PSI cylinders last longer than traditional 2,000 PSI cylinders, you will require fewer cylinders.

Generates Oxygen:

Plus, the UltraFill system generates oxygen and fills cylinders right in the home, eliminating recurrent oxygen deliveries.

Low Maintenance:

UltraFill's low-maintenance design enables your homecare provider to lower service costs for additional savings.

Intuitive Design:

Also, UltraFill's intuitive design is easy for oxygen you to use..

  • User friendly design
  • One-handed cylinder connect/disconnect
  • Auto detection of 3,000/2,000 PSI cylinders
  • You can stop and restart filling at their convenience
  • 50% quieter than the competition
  • Cylinders can be topped off to make partial fills
  • Uses 40% less power than the competition
  • Fill level indicator monitors cylinder fill level
  • Fill cylinder while OCD or regulator is attached


Dimensions (l x w x h): 9" x 20" x 25.5" (229 mm x 508 mm x 648 mm)

Weight: 45 lbs (20.4 kgs)

Sound level: 44 dBA

Power consumption: 110 watts

Cylinder type: 2,000 and 3,000 PSI*

Typical filling time: M6* (2,000 PSI), 1 hr 5 min MB08* (3,000 PSI), 1 hr 45 min

Typical use time (4.5:1 CSR, setting of 2 at 20 breaths per minute):

M6* (2,000 PSI), 5 hr 33 min

MB08* (3,000 PSI), 8 hr 40 min

OCD/regulator type: CGA-870 connection

Patient flow while filling: Up to 3 LPM with EverFlo, M600, and M605 Up to 7 LPM with Millennium M10

Compatible concentrators: EverFlo, EverFlo Q, M600, and M605, and M10 Oxygen concentration: 93% (+/- 3%)

Storage/transport humidity: 15 to 95% non-condensing

Write Your Own Review
You're reviewing:Philips Ultrafill System™
Copyright © 2013-present Magento, Inc. All rights reserved.